GMC

Home / GMC

We Service and Repair all GMC cars

  • 2018 GMC Yukon XL

    GMC Yukon XL
    Mileage
    131,864
    Service Date
    9/23/2026
    Services Performed
    • FUSE BOX – Remove & Replace – Under Hood – [NOTE: Labor estimates listed are for R&R only and DOES NOT include diagnosis time.]
    • Hook-up diagnostic scanner test equipment to perform OBD II communications test. Retrieve trouble fault code #P129D, P2535, C025E, and B3006 indicating faults for open/shorted circuits for ignition on/off, brake booster vacuum sensor, and hood ajar switch. Perform live data checks of systems voltages and sensor operations. Test for voltage at starter signal wire when attempting to start. 12V present at signal wire each time engine start is commanded. Ignition on and starter relay power present on diagnostic scanner when attempt to start. Removed fuse panel cover underhood and found fuse block slightly loose due to worn locking arms. Fuse block is removable unit that includes all relays and fuses and locking arms. Recommend replacement of underhood fuse block and quote estimate of repairs to customer. if starting issues persists, further diagnosis will be needed while vehicle is in a no-start condition.
     
    Lurleen W. gave our service a 5 star review on 10/9/2026
  • 2010 GMC Canyon

    GMC Canyon
    Mileage
    159,626
    Service Date
    10/2/2026
    Services Performed
    • State Inspection (Fail)
    • Emissions Test (Fail)
     
    Kristen A. gave our service a 5 star review on 10/2/2026
  • 2018 GMC Yukon XL

    GMC Yukon XL
    Mileage
    131,629
    Service Date
    9/4/2026
    Services Performed
    • State Inspection
    • Emissions Test #IM66116211
     
    Lurleen W. gave our service a 5 star review on 9/8/2026
  • 2018 GMC Yukon XL

    GMC Yukon XL
    Mileage
    130,876
    Service Date
    5/29/2026
    Services Performed
    • Changed engine oil & replaced oil filter. Replaced with up to 8 qts synthetic oil, lubricate chassis where required, re-set maintenance monitors, perform complete vehicle light check, and check all fluid levels and tire pressures.
    • Rotate tires from front to rear
     
    Lurleen W. gave our service a 5 star review on 5/29/2026
  • 2010 GMC Canyon

    GMC Canyon
    Mileage
    153,413
    Service Date
    4/9/2026
    Services Performed
    • Change oil and oil filter. Install up to 6 qts of synthetic blend oil, check all fluid levels, re-set maintenance monitors, perform complete vehicle light check, and set tire pressures to correct settings.
     
    Kristen A. gave our service a 5 star review on 4/10/2026
  • 2018 GMC Sierra 1500

    GMC Sierra 1500
    Mileage
    79,265
    Service Date
    2/3/2026
    Services Performed
    • Computer balance (1) tire
    • Remove, dis-mount, and mount tire
     
    Mike M. gave our service a 5 star review on 2/11/2026
  • 2005 GMC Yukon

    GMC Yukon
    Mileage
    107,545
    Service Date
    9/29/2025
    Services Performed
    • State Inspection
    • Emissions Test # IM56874627 (exempt)
    • Remove and replace right rear brake caliper
    • Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect brake calipers and master cylinder. Flush entire brake system including master cylinder and all brake calipers with new brake fluid until clean.
    • STABILIZER BAR CONTROL LINK – Remove & Replace – At Control Arm ,Link Kit, Both
    • Rotate tires from front to rear
    • Changed engine oil & replaced oil filter. Replaced with up to 6 qts synthetic oil, lubricate chassis where required, re-set maintenance monitors, perform complete vehicle light check, and check all fluid levels and tire pressures.
     
    Richard S. gave our service a 5 star review on 9/29/2025
  • 2018 GMC Yukon XL

    GMC Yukon XL
    Mileage
    128,282
    Service Date
    6/11/2025
    Services Performed
    • State Inspection
    • Emissions Test (Fail)
    • Changed engine oil & replaced oil filter. Replaced with up to 5 qts synthetic oil, lubricate chassis where required, re-set maintenance monitors, perform complete vehicle light check, and check all fluid levels and tire pressures.
     
    Lurleen W. gave our service a 5 star review on 6/12/2025
  • 2018 GMC Yukon XL

    GMC Yukon XL
    Mileage
    126,467
    Service Date
    4/16/2025
    Services Performed
    • SPARK PLUGS – Remove & Replace
     
    Lurleen W. gave our service a 5 star review on 4/17/2025
  • 2019 GMC Acadia

    GMC Acadia
    Mileage
    100,394
    Service Date
    4/7/2025
    Services Performed
    • State Inspection
    • Emissions Test # IM53227303
    • Changed engine oil & replaced oil filter. Replaced with up to 6 qts synthetic oil, lubricate chassis where required, re-set maintenance monitors, perform complete vehicle light check, and check all fluid levels and tire pressures.
    • SPARK PLUGS – Remove & Replace – 3.6L Eng – [Includes: R&I Intake Manifold.]
    • Remove and replace wiper blades N/C !!!!!
    • Rotate tires from front to rear
     
    Lurleen W. gave our service a 5 star review on 4/8/2025