Changed engine oil & replaced oil filter. Replaced with up to 5 qts synthetic oil, lubricate chassis where required, re-set maintenance monitors, perform complete vehicle light check, and check all fluid levels and tire pressures.
Rotate tires from front to rear
A/C COMPRESSOR DRIVE BELT – Remove & Replace – 2.5L Eng
WHEEL HUB – Remove & Replace – Rear, One Side (Left)
Gordon N. gave our service a 5 star review on 2/27/2026
Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect brake calipers and master cylinder. Flush entire brake system including master cylinder and all brake calipers with new brake fluid until clean.
Perform visual inspection of all belts and lines. Evacuate A/C system, apply vacuum to system to check for leaks, and recharge with new R-134 refrigerant. Test system performance after service.
Replace front brake pads and front disc brake rotors. Clean and lubricate brake calipers, slide mechanisms, and check brake fluid level. Road test vehicle.
Gordon N. gave our service a 5 star review on 9/21/2025
Changed engine oil & replaced oil filter. Replaced with up to 5 qts synthetic oil, lubricate chassis where required, re-set maintenance monitors, perform complete vehicle light check, and check all fluid levels and tire pressures.
Remove and replace cabin air filter, and clean all debris from ducts area.
Rotate tires from front to rear
Chris P. gave our service a 5 star review on 6/30/2025
Changed engine oil & replaced oil filter. Replaced with up to 5 qts synthetic oil, lubricate chassis where required, re-set maintenance monitors, perform complete vehicle light check, and check all fluid levels and tire pressures.
Check front suspension and steering components. Compensate wheel sensors, set caster, camber, and toe-in to manufactures specifications with all factory adjustment areas.
Computer spin balance (4) new tires
CONTROL ARM – Remove & Replace – Lower, Both and remove and replace rear lower control bushings and re-install after replacement.
Remove, dis-mount, and mount new tires
Walter H. gave our service a 5 star review on 5/1/2025
STABILIZER BAR CONTROL LINK – Remove & Replace – Both
Hook-up diagnostic scanner test equipment to perform OBD II communications test. Retrieve trouble fault codes #PO174, #PO171, and #PO420 indicating fault in air/fuel systems. Perform live data checks of systems voltages and sensor operations. Recommend replacement of mass air flow sensor before any further diagnostics can be performed. Quote estimate of repairs to customer.
Changed engine oil & replaced oil filter. Replaced with up to 5 qts synthetic oil, lubricate chassis where required, re-set maintenance monitors, perform complete vehicle light check, and check all fluid levels and tire pressures.
Remove and replace air flow sensor and clear all fault codes from computer memory after repairs.
Test drive vehicle to re-set all emissions related monitors for Emissions Test. Drive appx 25 miles for procedure.
Rick W. gave our service a 5 star review on 4/16/2025
CONTROL ARM – Remove & Replace – Lower, Left Side – [DOES NOT include alignment.]
WHEEL HUB – Remove & Replace – Front, Both – [DOES NOT include wheel alignment.]
WHEEL HUB – Remove & Replace – Rear,Both
Test drive customers vehicle to verify complaint. Perform complete suspension checks and diagnosed faulty front and rear wheel bearings, and left lower control arm. Quote estimate of repairs to customer.
Check front suspension and steering components. Compensate wheel sensors, set caster, camber, and toe-in to manufactures specifications with all factory adjustment areas.
Alex T. gave our service a 5 star review on 8/23/2024
Check front suspension and steering components. Compensate wheel sensors, set caster, camber, and toe-in to manufactures specifications with all factory adjustment areas.
Computer spin balance (4) tires
Remove, dis-mount, and mount new tires
Richard N. gave our service a 5 star review on 8/18/2024
Changed engine oil & replaced oil filter. Replaced with up to 5 qts synthetic oil, lubricate chassis where required, and check all fluid levels and tire pressures.
Gordon N. gave our service a 5 star review on 5/8/2024
Changed engine oil & replaced oil filter. Replaced with up to 5 qts synthetic oil, lubricate chassis where required, and check all fluid levels and tire pressures.
Rotate tires from front to rear
Remove and replace cabin air filter, and clean all debris from ducts area.
Remove and replace air filter. Clean all debris from housing assembly. N/C !!!!!!
Gordon N. gave our service a 5 star review on 12/9/2023